rusted or seized glow or spark plugs are difficult to disassemble
BIZOL Rust Shock+ f22
- easier and faster disassembly of seized injectors, glow and spark plugs
- risk of damaging other engine parts is reduced considerably
seized injectors, glow or spark plugs cannot be removed. What to do?
rusted or seized glow or spark plugs are difficult to disassemble
This highly effective tool loosens seized injectors, glow and spark plugs. A special formulation creates the effect of a „cold shock“ (up to -40 °C) forcing the rust layer to break and enabling the active ingredient to penetrate quickly and effectively. Ultra-fine PTFE particles improve the sliding behavior during disassembly. The product is free of acid and silicone and compatible with most plastic materials.
Article Nr. | Size in Litres |
---|---|
80018 | 400 ml |
Spray on injectors, spark plugs, glow plugs, and other bolted connections.
The aerosol should have room temperature. Best processing temperature 5 to 30°C. Before use, shake the aerosol. On very heavily contaminated objects...
The aerosol should have room temperature. Best processing temperature 5 to 30°C. Before use, shake the aerosol. On very heavily contaminated objects it is recommended to remove large or rough dirt and rust particles first. Apply the product until the seized parts have cooled down sufficiently. Allow to penetrate and to take effect. Repeat, if necessary.