Phase out Products

BIZOL Technology 10W-60 is a fully synthetic, high-performance engine oil. The synthetic components give it an extremely high quality level that is particularly useful for engines that are exposed to high thermal stress.

BIZOL Initial SAE 0W-20 is a low viscosity, standard SAPS fuel-efficient engine oil especially for petrol engines of Asian and American vehicles. It minimises the risk of low-speed pre-ignition (LSPI) and reduces wear during cold engine starts.

BIZOL Initial SAE 5W-20 is a low viscosity, standard SAPS fuel-efficient engine oil especially for petrol engines of Asian and American vehicles. It minimises the risk of low-speed pre-ignition (LSPI) and reduces wear during cold engine starts.

BIZOL Initial SAE 5W-30 is a low viscosity, standard SAPS fuel-efficient engine oil especially for petrol engines of Asian and American vehicles. It minimises the risk of low-speed pre-ignition (LSPI) and reduces wear during cold engine starts.

BIZOL Initial SAE 5W-30 A5/B5 is a low-viscosity, fuel-efficient, standard SAPS low-viscosity passenger car engine oil (gasoline, diesel) with excellent cleaning properties for a wide range of vehicles from European manufacturers with maintenance interval extension.

BIZOL Initial SAE 5W-40 is a fuel-efficient, standard SAPS low-viscosity passenger car engine oil (gasoline, diesel) with excellent cleaning properties for a wide range of vehicles with or without maintenance interval extension.

BIZOL Allround 10W-60 is fully synthetic high-performance engine oil. The synthetic components give it an extremely high quality level that is particularly useful for engines that are exposed to high thermal stress. Even particularly strong shear loads in high speed ranges do not affect the stability of the oils lubricating film. State-of-the-art detergent additives prevent the formation of laquered deposits on piston rings and provide for a long-lasting engine cleanliness.

BIZOL Initial SAE 15W-40 is a high-performance engine oil particularly suitable for vehicles with gasoline and diesel engines, with and without turbocharging. An optimal combination of base oils and additive technology improves engine performance and reduces friction and wear. Ideally suited for use in older vehicles.

BIZOL Initial SAE 10W-40 is a high-performance engine oil particularly suitable for vehicles with gasoline and diesel engines, with and without turbocharging. An optimal combination of base oils and additive technology improves engine performance and reduces friction and wear. Ideally suited for use in older vehicles.

BIZOL Initial SAE 20W-50 is a high-performance engine oil particularly suitable for vehicles with gasoline and diesel engines, with and without turbocharging. An optimal combination of base oils and additive technology improves engine performance and reduces friction and wear. Ideally suited for use in older vehicles.

BIZOL Initial Tech 5W-30 C2 is a fuel-efficient, mid SAPS high-performance engine oil based on base oils of the latest technology with lowered HTHS viscosity.Specially developed for vehicles of Japanese and Korean car manufacturers.

BIZOL Initial Tech 5W-30 C3 is a fuel-saving , mid SAPS engine oil (gasoline, diesel) for vehicles with modern exhaust aftertreatment and extended maintenance interval. Ensures the functionality of the

Exhaust aftertreatment system and ensures maximum service life.

BIZOL Technology 5W-40 is one of the most modern low viscosity year-round engine oils that can be used in diesel and gasoline engines with or without turbochargers and charge air cooler. Because of its state-of-the art HC-Technology and the superior additive package used, this oil provides reduced fuel consumption, remarkable engine performance with extended service intervals. This oil ensures best wear protection and a smooth cold start.

BIZOL Protect 10W-40 UNI is a universal mineral engine oil for all types of modern turbocharged and non-turbocharged diesel and gasoline engines with or without catalytic converter. The latest additive technology in combination with high-quality base oils ensures excellent protection against oxidation, wear, improved protection against foaming, and has anti-corrosive and purifying properties. It offers these unique properties under all operating conditions, even when extended oil change intervals are required. This product is ideally suitable for mixed fleets.

BIZOL Protect 15W-40 is a mineral based engine oil that meets the latest requirements of the automotive industry. It can be used in cars with diesel engines without DPF. Reliable base oils in combination with the latest additive technology have produced an engine oil that withstands the stress of a modern diesel engine under all operating conditions. The product neutralizes negative influences of fuel, reduces friction and wear, and prevents sludge formation.

BIZOL Truck Essential 15W-40 is a modern high-performance diesel motor oil with extended oil change intervals. It meets the latest recommendations of commercial vehicle manufacturers. This multigrade motor oil allows to extend oil change intervals. It corresponds to servicing systems for vehicles of many well-known manufactures, such as Mercedes Benz, MAN or VOLVO, including turbocharged engines.

BIZOL Truck Primary 15W-40 is a modern low viscosity, universal motor oil for use in all diesel engines, under any kind of operating and weather conditions (year-round oil). It surpasses the highest requirements of modern diesel engines that are currently demanded from motor oils. The advanced additive technology enhances wear protection and enables maximum oil change intervals. The ideal lubricant for all diesel engines, with or without catalytic converter and turbochargers. In case of extended oil change intervals the instructions of the vehicle manufacturer are to be followed.

Bizol Truck New Generation 10W-40 is a high-performance MHPD (Maximum High Performance Diesel) - fuel-efficient engine oil specially developed for modern diesel engines with exhaust aftertreatment systems in trucks, buses and construction machinery.High-quality low ash additive components ensure excellent wear protection as well as high lubricant film stability under all operating conditions.

BIZOL Mono SAE 40 is an all-purpose high-alloyed HD-Monograde engine oil for Otto, Diesel and stationary engines. Mineral base oils with protective additives ensure effective wear and corrosion protection as well as very good lubrication performance at high and low temperatures.

BIZOL Mono SAE 50 is an all-purpose high-alloyed HD-Monograde engine oil for Otto, Diesel and stationary engines. Mineral base oils with protective additives ensure effective wear and corrosion protection as well as very good lubrication performance at high and low temperatures.

BIZOL Allround Gear Oil TDL 75W-90 is a fully synthetic, multi-grade gear oil for universal use. It meets almost all requirements of modern commercial vehicles regarding special lubrication for the entire drive line. TDL gear oil is perfectly suitable for lubricating all components of the drive line, from the sophisticated synchronized and non-synchronized manual gears to hypoid axle gears. Due to its characteristics as a high-performance allround product, it significantly contributes to the streamlining process in modern vehicle fleets. The reduction of friction due to optimum viscosity helps to save fuel.

BIZOL Technology Gear Oil GL5 80W-90 is a multi-grade transmission oil which is resistant to temperature fluctuations and oxidation and enriched with agents for wear reduction at bearings and tooth flanks. Special additives prevent rust and foam formation.

BIZOL Protect ATF CVT is a high-performance automatic transmission fluid developed specially for the latest generation of Continuosly Variable Transmission (CVT) gear boxes. Selected base oils and a well-adjusted additive package protect against foam formation, which is very important for CVT gear boxes. The product has excellent anti-aging and anti-oxidation characteristics. BIZOL Protect ATF CVT is suitable for the use in Autotronic gear boxes of the Mercedes A-and-B Class. It is also applicable in many variable automatic transmissions of different manufacturers, among others in Audi Multitronic.

BIZOL Friction Modifier+ o94 is a powerful anti-friction and anti-wear engine oil additive based on advanced BIZOL W-guard Technology. It creates a stronger lubricating film on metal surfaces and allows an effective lubrication throughout a long-term frictional operation. This ensures an optimum engine performance and reduced fuel consumption. BIZOL Friction Modifier+ o94 is compatible with all commercially available engine oils for gasoline and diesel engines.

BIZOL Chain+ L53 is a spray to lubricate chain-driven transmissions under exceptionally high strain. BIZOL Chain Grease can be used like oil with the properties of grease with outstanding mechanical and thermal stability and is dirt repellent. It is weather resistant, hydrophobic and pH-neutral. It comes with an additional spray nozzle and an extension tube in the cap.

BIZOL Pro HLP Hydraulic Oils are used as pressure fluids in hydraulic systems. They contain ingredients which raise the levels of aging stability, corrosion protection, and EP characteristics. Due to special additives they meet all requirements and are being used primarily in hydraulic systems where high thermal loads occur, water may cause corrosion, and whose pumps and hydro-motors require oils with wear protection for mixed friction due to operating conditions.

BIZOL Pro HLP Hydraulic Oils are used as pressure fluids in hydraulic systems. They contain ingredients which raise the levels of aging stability, corrosion protection, and EP characteristics. Due to special additives they meet all requirements and are being used primarily in hydraulic systems where high thermal loads occur, water may cause corrosion, and whose pumps and hydro-motors require oils with wear protection for mixed friction due to operating conditions.

BIZOL PRO Grease LT LX 03 Long Term is a special grease with synthetic base oil and EP additives for roller and plain bearings at highest loads. Due to its reliable lubricating performance it is extremely well suited for highly loaded bearings, unfavorable operating conditions and extended relubricating periods. Due to its extremely adherent lubricating film its application is especially advantageous for machines and vehicles in the construction industry, including cement, gravel plants and quarries, as well as in agriculture. When applied on normally loaded bearings, the relubrication periods may be significantly extended. Operating temperature range: -30C - +150C

EP lubricants with outstanding lubricating and wear protection properties. Produced from high-quality base oils and the most modern sulphur-phosphorus additives. Suitable for use in industrial gears, roller and plain bearings with high pressure loads and especially in large plants with circular lubrication.

BIZOL Coolant Asia is a long-life coolant for protection of car cooling systems. It is produced on the basis of ethylene glycol and contains the phosphate components which are characteristic for requirements of Asian car manufacturers. This product is free of nitrite, amine, silicate and borate. This formulation has extraordinary long lasting change intervals till 10 years. Concentrate. To be mixed with water.