• page
  • en/
  • 1
  • Home
  • pages/
  • 3
  • 20
 
Gallery

Bildtitel

( Picture     from     )
Download
4
English
  • Deutsch
  • Russian
4
  • Products
  • Partner
  • News
  • Glossary
  • Search All
  • Green Oil
  • Motor Oils
  • Additives
  • ATF
  • Gear Oils
  • Technical Sprays
  • Car Chemicals
  • Greases
  • Industrial Lubricants
  • ###alttext###
    Catalog
Become a partner
Forgot your password?

  • BIZOL Green Oil
  • Products
  • Partners
 
 
 
 
 
 
 

Stop & Go

Is your engine ready for traffic jams & city traffic?

Engines are designed for driving, but these days vehicles remain stationary in city traffic up to 40% of the time. The engine runs idle, subjecting it to a far greater burden. The right engine oil can provide effective help: BIZOL Green Oil is the first product line that was developed especially to meet the needs of engines in city traffic. more

 
 
 
 
 
 
 

BIZOL Green Oil

New solutions for the long life of your engine

Your engine should give you precisely the performance that you expect from it. After all, our very lives can depend on the quality of our vehicles and their engines, and engine oil is a decisive factor in this. BIZOL Green Oil is perfectly designed to cope with the demands of stop & go traffic and cold starts. more

 
 
 
 
 
 
 

The company

Innovative products designed for today’s challenges

With BIZOL Green Oil, we have developed the solutions for engines exposed to heavy city traffic use. As a mid-sized company, we are able to react to changes immediately. Our research and development are focused on problems that large concerns generally ignore. more

 
 
 
 
 
 
 

Made in Germany

The highest quality in accordance with German standards

As a German manufacturer of engine oils and high-performance additives, we uphold the outstanding quality standards of German automobile manufacturers that are acclaimed throughout the world. The consistently high quality of our engine oils ensures that your engine is ready to handle the changes in city traffic conditions. more

 
 
 
 
 
 
 

International partners

Over 52 global partners speak the same language – BIZOL

In recent years a growing number of partners around the world have begun relying on BIZOL, convinced of the quality of our products. You can also be a part of this highly capable international network, successfully establishing a unique, unrivalled product line on today’s market. more

Oil Change Guide

Which oil 
is right for me?

We help you to select the right motor oil and give useful tips on maintenance intervals.

News

06.6.2013

Boris Tatievski in the Ekonomik Çözüm

06.6.2013

BIZOL Green Oil providing advantages for vehicles in heavy traffic ...

06.6.2013

BIZOL Green Oil, enabling better fuel efficiency, is in Turkey ...

BIZOL Green Oil

BIZOL Green Oil

10W-40

BIZOL Green Oil

BIZOL Green Oil Diesel

10W-40

BIZOL Green Oil

BIZOL Green Oil Synthesis

 5W-40

BIZOL Green Oil

BIZOL Green Oil Ultrasynth

 5W-30
  • Jobs
  • Terms and Conditions
  • Legal notice
  • Contact
  • News
  • About us
 

Oil Change Guide

FAQ

I used to do with an engine oil SAE 15W-40. Would you advise a change for a 10W-40 or a 5W-40 oil before the winter season?

Due to low temperatures during the winter months, oil viscosity at cold start is significantly higher. Therefore it will take longer to reach all lubrication points in the engine. Thus it makes sense to change during the winter and to use an engine oil with lower viscosity at low temperatures (such as BIZOL Gold 10W-40 or, even better, as BIZOL Platin 5W-40). Such oil reaches the critical points in the engine much faster, which significantly reduces wear development at cold start. In addition, the fuel consumption during the cold running stage is reduced, and so it the emission. The starting-up time is shorter, the engine run is smoother, and the battery’s service life is extended.

Attention! Before oil changing, please consider the corresponding instructions in the user’s guide for your car.

Add To Clipboard
Delete
  • overlay
  • en/?kb=faq#1
  • 1
  • FAQ
  • pages/
  • I used to do with an engine oil SAE 15W-40. Would you advise a change for a 10W-40 or a 5W-40 oil before the winter season?
  • 4
  • 5
Print

What is a catalytic converter and how does it function?

Catalysts are substances that, when added, initiate a chemical reaction between other substances or have an (accelerating, slowing, directing) influence on them without changing themselves. In the mineral oil industry, solid catalysts are mostly used, such as cobalt, molybdenum, platinum, nickel, barium, etc., which are often connected to a catalyst medium.

As a general rule, there are one-, two-, and three-way catalytic converters for personal cars with petrol engines. Together with lambda probe and a control unit (according to operating conditions), they are part of the exhaust system and supposed to transform pollutant exhaust fumes (such as hydrocarbons CH, nitric oxides NO, and carbon monoxide CO) into quite harmless gases (water vapour H2O, carbon dioxide CO2, and nitrogen N).

Add To Clipboard
Delete
  • overlay
  • ?kb=faq#5
  • 5
  • FAQ
  • pages/
  • What is a catalytic converter and how does it function?
  • 4
  • 6
Print

What aspects should be minded while checking the automatic transmission fluid?

Before checking the level of the automatic transmission fluid, consult the owner’s manual for the recommendations of a transmission manufacturer. Normally, it is required to do it when the vehicle is running on the level ground. Take the transmission dipstick and check the fluid for colour and odour. It should be red and look like a transparent syrup. If it is muddy and smells burned, let your vehicle be examined by a technician.

Add To Clipboard
Delete
  • overlay
  • ?kb=faq#4
  • 4
  • FAQ
  • pages/
  • What aspects should be minded while checking the automatic transmission fluid?
  • 4
  • 7
Print

How could the temperature of the freezing of prepared antifreeze be determined after mixing the BIZOL-concentrate with water? Could the temperature of freezing be determined by means of measuring density of antifreeze?

There is a special table on mixing of the product with water placed on container with antifreeze BIZOL (Art. 1111). If you followed this table while mixing, the temperature of freezing of prepared mix correspondents to the one, which you wanted. It can be checked out with assistance of special equipment - refractometer, for example, Freezemat of Liqui Moly trademark (www.liquimoly.ru). Principle of measurement in such equipment is based on measuring of density of substance. The scale shows the final result in °C. There is more simple, so to say, traditional equipment – such as testers, for example areometers, which probably is known to you as measurers of density of electrolyte in accumulator-based batteries.

Bizol Antifreeze Water Pour-Point

1 ltr. 1,9 ltr. – 20° C

1 ltr. 1,25 ltr. – 30° C

1 ltr.  0,9 ltr. – 40° C

Add To Clipboard
Delete
  • overlay
  • ?kb=faq#7
  • 7
  • FAQ
  • pages/
  • How could the temperature of the freezing of prepared antifreeze be determined after mixing the BIZOL-concentrate with water? Could the temperature of freezing be determined by means of measuring density of antifreeze?
  • 4
  • 8
Print

Do you have any recommendations for cleaning of mechanical and automatic transmissions? Wynn"s recommends to use an engine cleaner for rinsing of mechanical transmission. What is your opinion on this topic?

Sure, our BIZOL Motor-Reiniger (Part. No 3984) can be also used for machanical transmissions (except those with the wet clutch system). However, the amount has to be adjusted to the volume of a particular transmission. You shouldn"t drive your vehicle during this procedure.

Unfortunately, we can recommend absolutely no product for cleaning of automatic transmission systems, because their adhesion and friction characteristics can easily be changed this way. There is also no adequate product on the market today. A further problem - during the oil changings, a lot of oil remains in the torque converter.

Add To Clipboard
Delete
  • overlay
  • ?kb=faq#6
  • 6
  • FAQ
  • pages/
  • Do you have any recommendations for cleaning of mechanical and automatic transmissions? Wynn"s recommends to use an engine cleaner for rinsing of mechanical transmission. What is your opinion on this topic?
  • 4
  • 9
Print
 

Glossary

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z

ACEA

Association des Constucteurs Europeens d"Automobiles

Additives

Additives are oil-soluble substances which are added to the mentioned base oils. They chemically and/or physically change or enhance the properties of lubricants.


Chemically active additives:

• Detergents

• Dispersants

• Antioxidants

• Wear-protecting additives

• Corrosion inhibitors


Physically active additives:

• Viscosity index modifier

• Pour point modifier

• Friction characteristics modifier

Antioxidants

Under the influence of heat and oxygen, lubricants tend to oxidise (ageing). This corrosion process is accelerated by acid combustion products and traces of metals which have catalytic effects (abrasive or corrosive wear). The result is deterioration, which entails the development of acid as well as lacquer, resin, and sludge consistent deposits; these are insoluble in oil (e.g. like oil carbon). By adding antioxidants, ageing protection can be enhanced significantly. Though they cannot entirely prevent ageing process, antioxidants demonstrably decelerate it.

Substances for ageing protection can be effective in three ways:

• Scavengers (against primary ageing effects): Radicals are chains of carbonic hydrogen which possess free valences due to a breach in the chain or breaking out of hydrogen atoms. Oxygen immediately attaches itself to these spots (oxidation). By transferring hydrogen from the additive to the chemically active spot, scavengers saturate (repair) these “gaps”.

• Peroxide decomposers (against secondary ageing effects): They are fully effective not sooner than ageing substances (oxygen compounds) have developed. Peroxide decomposers detract oxygen and create harmless compounds.

• Passivators / Metal-ion deactivators: They cause passivating of iron and copper particles and thus stop or lessen the catalytic influence these metals have on the ageing process. Passivators clasp around metal ions in oil so that they have almost no catalytic activity at all.

API

American Petroleum Institute

ATF

Automatic Transmission Fluid

Automatic Transmission Fluid (ATF)

ATFs are especial lubricants that meet extraordinary high demands of automatic clutch and transmission systems. These require a very good viscosity and thermic characteristics, shearing strain stability, high resistance to oxidation, outstanding frothing and air-releasing properties, defined friction characteristics, EP characteristics, etc.

All-Year Oils

They are also known as multigrade oils and can be used in our temperate climate over the whole year. These fluids are not too viscous during the winter and does not become too thin at high engine temperatures, like e.g. 0W-30, 0W-40, 5W-30, 5W-40, 10W-40, 15W-40, 20W-50.

Anti-Wear (AW) Additives

With the help of appropriate additives, it is possible to establish an extremely thin layer on slides; its shearing strain stability is significantly lower than that of metals. This layer is solid under normal conditions, but turns lubricant under wearing conditions (pressure, temperature). This way excessive wear (galling or welding) can be prevented. If required (a metal/metal contact), the film is continuously renewed by means of a chemical reaction.

BIA

Boating Industries Association

BMW

Bavarian Motor Works

Base Oils

Base oils bestow on lubricants their fundamental specific characteristics, which noticeably influence the performance of the end products.

Base oil products are distillation and raffination products that are extracted from mineral raw material – petroleum – and consist mainly of saturated hydrocarbons, sometimes with small percentage of unsaturated hydrocarbons.

Hydro-cracking oils are refined mineral oils of high purity and with the enhanced molecular structure.

Poly-alpha-olefins (PAO) are products of petroleum chemistry (synthesis). They are chemically created straight-lined compounds of hydrocarbon.

Synthetic esters are compounds of synthetically created acids with alcohols. They are chemically made products with molecules of every form, structure, type, and size.

CCMC

Comité des Constructeurs d"Automobiles du Marché Commun

Corrosion Inhibitors

Generally speaking, corrosion is a chemical or electrochemical affect on metal surfaces. As a protection against corrosion, additives that act on interfaces qualify best; these can be either ash-free or ash-producing. The products of polar group attach themselves to metal surfaces, while the rest of alkyls build up thick, fur-like, hydrophobic (water-resistant) barriers. Due to their polar structure, corrosion inhibitors compete with the EP and AW additives, meaning that the effectiveness of the latter can be thus affected.

Detergents

Detergents are washing substances that counteract formation of deposits on the component parts exposed to high temperatures. Detergents virtually keep the engine clean. Moreover, they build up alkaline reserves in the engine oil, so that acidifying combustion products can be neutralised.

Detergents are ash-compounding (metalorganic) additives, which prevent depositing of solid dirt particles on metal surfaces (agglomerating).

Diesel Engines Oils

At present, the highest requirements on lubricants for conventional and supercharged diesel engines are presented by the classifications ACEA B3 and B4 as well as the clearance VW 505.00. Such oils are optimally suitable for use in self-priming or supercharging diesel engines with or without charge air cooler. High-performance engine oils alone meet these demands, like our Bizol Diesel Ultra SAE 10W40.

DIN

German Standard Institute

Dispersants

The dispersants’ task is to envelope solid and liquid particles (e.g. dust, water, combustion products, oxidation products) and to keep them dispersed and in suspension to avoid deposits.

The process of peptization: It refers to enveloping of solid particles in oil and keeping them in suspension by means of ash-free (organic) dispersants.

The process of solubilisation: Enveloping and keeping in suspension of fluid particles (water, acids). No neutralisation.

DOT

Department of Transportation

DPF

Diesel Particulate Filter

EMA

Engines Manufacturer Association

Extreme Pressure- (EP-) Additive

The oldest EP additive is pure sulphur. The EP and AW additives are substances that are active on interfaces; additives of polar group usually contain different combinations of the elements zinc, phosphor, and sulphur. The best-known representative of this kind is zinc dithiophosphat (ZDP), which is also effective for preventing ageing and corrosion.

The EP additives are mixed to transmission, engine, hydraulic system, metalworking oils in order to increase their bearing pressure properties and to decrease wear in the areas with mixed friction. The effect is based on establishing layers on surfaces (metal surfaces). They are supposed to prevent welding of rough spikes in the areas with mixed friction characteristics and to grand possibly wearless sliding of contacting metal surfaces. The reducing of friction is also desirable.

Engine Oils

Engine oils are used to lubricate bearings, driving gear, cylinders and the steering wheel for the internal combustion engine; they are classified according to their viscosity characteristics (SAE  classes); there are non-alloyed and alloyed engine oils.

The present-day engine oils, their types and special characteristics, are based on different base oils or base oil mixtures. Complementarily, additives are used according to the intended effect. Only a well-balanced formulation (base oil with additive substances) gives a high-performance engine oil.

Einbereichsöl

Erfüllt ein Öl nur die Anforderungen einer SAE-Klasse, so ist es ein Einbereichsöl, z.B. SAE 10W, 30, 50 bei Motorölen oder SAE 80W, 90, 140 bei Getriebeölen.

FIAT

Fabbrica Italiana Automobili Torino

FMVSS

Federal Motor Vehicle Safety Standard

Friction Modifier

Friction modifiers (FM) are additives that lower friction and are only effective in areas with mixed friction rates. On surfaces, the active substances create fur-like layers (physical process) which are able to keep metal surfaces separated. The FM are very polar, i.e. they possess high affinity to surfaces in connection with friction-preventing properties.

Fully Synthetic Engine Oils

Synthetic base oils provide a basis for the engine oils with significantly enhanced properties. Fully synthetic engine oils can be added into petrol and diesel engines and provide an optimum wear protection, excellent oil supply at the cold start, smooth engine running, and outstanding cleanliness of an engine. They often fulfil the highest requirements API,  ACEA  and comply with the clearances by most engine manufacturers. Especially suitable for long intervals between oil changes. Typical viscosity classes: 0W-30, 0W-40, 5W-40.

GL

Gear Lubricant

HTHS

High Temperature High Shear

Hydraulic Oils

They are ageing-resistant, low-viscosity, not frothing, highly refined fluids extracted from a mineral oil with low pour point. Used in hydraulic systems, predominantly with hydrostatic drive. They can also be used in a system with hydrodynamic drive as long as they meet its requirements.



 

Hypoid Gear Oils

Extreme pressure lubricants with EP additives that enhance lubricating qualities and prevent corrosion. Mainly used for axle drive in vehicles that have spiral bevel gears and offset gears (hypoid gears).

ISO

International Organization for Standartization

JAMA

Japan Automobile Manufacturers Association

JASO

Japanese Automobile Standard Organisation

Kinematic Viscosity

The ratio of dynamic viscosity to density at a given temperature. Measure: square millimetre per second [mm²/s], previously centistokes [cSt].

Kinematic viscosity = dynamic viscosity / density

Modifiers

The use of VI modifiers (VI = viscosity index) enables manufacturing of multigrade engine oils. The VI modifiers increase or elongate the viscosity of a particular oil and thus enhance its viscosity-temperature properties.

Mineral Engine Oils

Engine oils are usually manufactured of mineral oils. Yet these oils have insufficient performance in terms of ever higher requirements such as extended intervals between oil changes, high engine performance, demands of smooth and noiseless engine running, etc. Typical viscosity classes: 10W-40, 15W-40, or 20W-50.

Multigrade Oils

If an oil meets the requirements of both a W-class in a cold state and a class without “W” at 100°C, it is referred to as a multigrade oil, e.g. SAE 0W-30, 10W-40, 15W-40 for engine oils, or SAE 75W-90, 80W-90, 85W-140 for transmission oils

NMMA

National Marine Manufacturer Association

OEM

Original Equipment Manufactures

PAO

Polyalphaolefin (Synthetic hydrocarbon as a basis for engine oil. Source product - ethen.)

PIB

Polyisobuten (Synthetic hydrocarbon as a basis for engine oil. Source product - buten)

Pour Point Modifier

Pour point is the lowest temperature (in degree Celsius) at which an oil is just pouring. Solidification of a particular oil is determined by paraffin waxes in the base oil, which begin to crystallise at low temperatures. The addition of substances that reduce the pour point protracts this process and enhances the low temperature characteristic of oils.

PSA

Peugeot Société Anonyme

Retarder

is a device used to augment or replace some of the functions of primary friction-based braking systems of (usually) heavy vehicles.

Smooth-Running Engine Oils

They have an advantageous flowing characteristics at low temperatures and high thermic stability, and need less pumping. Hence, they have a positive influence on fuel consumption. Typical viscosity classes: 0W-30, 0W-40, 5W-40, 5W-30, 10W-40.

SAE

Society of Automotive Engineers

SAE Classes in General

Engine and transmission oils for vehicles are characterised by SAE  classes, which have also been transferred to the according DIN  standards. The following is determined by them: temperatures for viscosity measuring, viscosity threshold values and attribution of classes. Oils that are attributed viscosity threshold values for cold state additionally get the letter “W” (for “winter”) in their classification.


As for hot state, viscosity of engine and transmission oils is determined at 100°C, uniform for all SAE classes. However, this does not come up to real-life conditions of engine oils, thus in many cases, viscosity at high temperatures and under high shearing strain (HTHS ) is additionally appointed to engine oils.

SAE Classes for Engine Oils

Following classes are standardised: 0W, 5W, 10W 15W, 20W, 25W-20, 30, 40, 50, 60

SAE Classes for Transmission Oils

Following classes are standardised: 70W, 75W, 80W, 85W-80, 85, 90, 140, 250

SAPS

Sulphated Ash, Phosphorus, Sulphur

Semi-Synthetic Engine Oils

These are mineral oils with synthetic components. They enhance the cold start performance, keep the engine clean, and provide an outstanding wear protection. Typical viscosity classes: 10W-40, 5W-40.

SHPD

Super High Performance Diesel

STOU

Super Tractor Oil Universal

TASA

Typi A Suffix A

TC-W3

Test Cycle Watercooled 3

TOU

Tractor Oil Universal

TWC

Three Way Catalyst

UHPD

Ultra High Performance Diesel

UTTO

Universal Tractor Transmission Oil (obsolete)

Viscosity

Viscosity is the capacity of a fluid to provide resistance and thus friction to an opposite laminar movement of two adjacent layers. Having a high viscosity means being viscid, whereas a low viscosity is used synonymously to thin fluid.


In short, viscosity can be described as flow resistance.


Viscosity strongly depends on temperature. The indication of the viscosity range for a multigrade oil (e.g. 10W-40) specifies the oil performance at high and low temperatures. The number before the W (10) stands for the viscosity at low temperatures (40°C), whereas the number after the W (40) indicates the viscosity at high temperatures (100°C).


There is a distinction made between the dynamic viscosity (measured in Pa s) and the kinematic viscosity (in mm2/s = cSt), the last one being the quotient of dynamic viscosity and density. Like density, viscosity also depends on temperature and pressure.


The viscosity index of a fluid is determined by its viscosity measured at 40°C and 100°C.


Viscosity was the basis for the first classification system for engine oils in 1911 and was defined in the SAE  classification system. Today, viscosity is still one of the most important characteristics of an oil. The development of testing procedures which could better predict the motor behaviour has resulted in viscosity measurements (DIN  51511) at different temperatures and velocity gradient.

VI

Viscosity Index

Viscosity Index (VI)

Viscosity of every oil changes according to its temperature. It will be decreasing when the temperature is rising, and increasing when the temperature is declining. Viscosity index is a characteristic for the viscosity/ temperature performance of oils. The higher the number, the less the viscosity of a particular oil will change at temperature variations. The less its viscosity changes conditional upon temperature, the better an oil is suitable for practical use.

Viscosity Classes

Viscosity is the best-known characteristic of lubricating oils. It is the measurement for the inner friction of an oil when flowing. When an oil is cold, its inner friction is high (high viscosity). The warmer the oil, the lower its inner friction will be (low viscosity).

Changes in viscosity conditional upon temperature can vary from oil to oil and are characterised by the viscosity index (VI), a non-dimensional numerical value. Single-range oils have the VI about 100, multigrade oils – up to 150, depending on its range.

Viscosity-Temperature Modifiers

Metaphorically speaking, they are very long, fibre-like molecules that are existent in oil and are conglomerate when cold; they offer relatively low resistance to the movement of oil molecules. With increasing temperature, they loosen, take a bigger volume, and create a meshed network that slows down the movement of oil molecules and protracts a too quick thinning-out of oil.

ZF

Zahnradfabrik Friedrichshafen (Gearwheel factory)

Viscosity Comparison

BIZOL oils are different from the rest, particularly in their flow properties. The trade literature in the industry designates this property as viscosity – an important criterion in relation to the influence of temperature. The less the oil’s viscosity is affected by changing temperatures, the better suited it is for use in your vehicle.

The falling sphere viscometer depicts how oils behave under different temperature conditions. We compare the flow properties of our oils BIZOL Long Distance SAE 0W-30, BIZOL Platinum SAE 5W-40, BIZOL Gold SAE 10W-40 and BIZOL Silver SAE 15W-40 at 0° C, 40° C and 100° C. Select two oils you would like to compare along with the temperature and click “Start” to observe the differences.

0.00

Oils in comparison

  • BIZOL Long Distance 0W-30
  • BIZOL Platin 5W-40
  • BIZOL Gold 10W-40
  • BIZOL Silber 15W-40

oil temperature

  • -15° C
  • 0° C
  • 40° C
Start
Reset
2.25
 
Add To Clipboard
Delete
  • overlay
  • en/?kb=viscosity
  • 3
  • Viscosity Comparison
  • pages/
  • BIZOL oils are different from the rest, particularly in their flow properties. The trade literature in the industry designates this property as viscosity – an important criterion in relation to the influence of temperature. The less the oil’s viscosity is affected by changing temperatures, the better suited it is for use in your vehicle.
  • 4
  • 10
Print

Oil Change Intervals

City traffic’s influence on oil change intervals.

  • daily mileage
  • mileage on highway
  • mileage in city traffic
  • reduced oil change interval
    • 50 km
    • 400 Days
    • 136 Days
    • 66 %
    • 50 km
    • 400 Days
    • 136 Days
    • 66 %
    • 100 km
    • 200 Days
    • 94 Days
    • 53 %
    • 100 km
    • 200 Days
    • 94 Days
    • 53 %
    • 150 km
    • 133 Days
    • 71 Days
    • 46 %
    • 150 km
    • 133 Days
    • 71 Days
    • 46 %
    • 200 km
    • 100 Days
    • 58 Days
    • 42 %
    • 200 km
    • 100 Days
    • 58 Days
    • 42 %
    • 200 km
    • 100 Days
    • 58 Days
    • 42 %
    • 200 km
    • 100 Days
    • 58 Days
    • 42 %
    • 250 km
    • 80 Days
    • 48 Days
    • 40 %
    • 250 km
    • 80 Days
    • 48 Days
    • 40 %
    • 250 km
    • 80 Days
    • 48 Days
    • 40 %
    • 300 km
    • 67 Days
    • 42 Days
    • 38 %
    • 300 km
    • 67 Days
    • 42 Days
    • 38 %
    • 300 km
    • 67 Days
    • 42 Days
    • 38 %
    • 350 km
    • 57 Days
    • 37 Days
    • 36 %
    • 350 km
    • 57 Days
    • 37 Days
    • 36 %
    • 350 km
    • 57 Days
    • 37 Days
    • 36 %
    • 400 km
    • 50 Days
    • 33 Days
    • 35 %
    • 400 km
    • 50 Days
    • 33 Days
    • 35 %
    • 450 km
    • 44 Days
    • 29 Days
    • 34 %
    • 450 km
    • 44 Days
    • 29 Days
    • 34 %
    • 500 km
    • 40 Days
    • 27 Days
    • 33 %
    • 500 km
    • 40 Days
    • 27 Days
    • 33 %
Stop & go in the city or the open road on the motorway? Motors need different lubrication for city traffic than they do for open motorways. The oil change intervals recommended by automobile manufacturers account for the mileage driven, but not for the heavy workloads motors are subjected to in stop & go traffic. Oil change intervals need to be adapted to the actual conditions of the vehicle’s use: the more city traffic, the shorter the oil change intervals (see chart). BIZOL Green Oil was developed to compensate for greater motor workloads in city traffic – your innovative solution for the long life of your motor.

BIZOL Green Oil

A strong motor oil, which  
      matches the new  
           challanges of city traffic.

Highway

City traffic

 
Add To Clipboard
Delete
  • overlay
  • en/?kb=oilchange
  • 1
  • Oil Change Intervals
  • pages/
  • City traffic’s influence on oil change intervals.
  • 4
  • 5
Print

Bookmarks

Head Title / Description

  • Read
  • Print
  • Send
  • Delete

Head Title / Description

  • Read
  • Print
  • Send
  • Delete

Are you interessted in:

Head Title / Description

  • Read
  • Add To Clipboard

Head Title / Description

  • Read
  • Add To Clipboard
Take all
  • Delete bookmarks
  • Print bookmarks
  • Send bookmarks
  • Contact
  • Oil Change Guide
  • FAQ
  • Glossary
  • Viscosity Comparison
  • Oil Change Intervals
  • Clipboard